You are here: Home>Products>New product series

MB068-II automatic cloth machine
    Laboratory textiles and clothing, rubber, plastic, leather, toys, paper testing and sample preparation field, can be prepared for physical properties, chemical projects and other testing required samples.
    1. The two working modes are suitable for different sample preparation.
    2. The two cylinders of gas and oil are combined with pressure, and the work is quiet and no noise.
    3. Multiple security protection: hands button switch; infrared induction; tool mode installation status hint; lower template installation status hint; screen soft switch.
    4. It can be separately connected to air compressor, and also can be connected with a centralized gas supply device.
    5. The pressure speed and time can be adjusted to meet the needs of different samples.
    6. With DM series knife die, samples of different sizes and sizes can be prepared.
    7. Special cleaning air gun to prevent cross contamination of samples.
    8. The initial angle and angle of rotation can be set.
    Pressure plate diameter
    Sample size
    According to the requirements of different testing, the samples of different sizes and sizes can be produced with the tool die, minimum sample size5mm×5mm
    Sample making efficiency
    One complete sample making process:about 20s;sample weight:according to the material of the sample and the knife die. In the production of 5mm×5mm textile sample time,we can make about 20g at one time,at the same time to meet the pH value, formaldehyde, azo, composition, pesticide residues and other quantitative test project needs
    Maximum working pressure
    10 ton,the pressure of working gas is not less than 0.5MPa
    Shape size
    Rotation angle adjustable
Copyright © 2017 Quanzhou Meibang Instrument Co., Ltd. Address:Quanzhou Fujian ICP:閩ICP備10202419號-1